LoRa Alliance, Inc® Technical Committee Publications
This documents lists the publications that are issued by the LoRa Alliance Technical Committee.
Read Flipbook
This documents lists the publications that are issued by the LoRa Alliance Technical Committee.
Read Flipbook
This document describes how an end-device-to-device communication protocol may be designed using the LoRaWAN L2 specification overlaid with application-layer signaling.
Read Flipbook
LATEST VERSION: This document provides the Vendor ID to be used with TR005 LoRaWAN Device Identification QR Codes.
Read Flipbook
This document proposes a list of test procedures to measure the physical layer performance of LoRaWAN Gateways. The document defines what RF paraments to test and includes guidelines on how to measur
Read Flipbook
LATEST VERSION: This document summarizes all the components and process steps involved in an end-device Firmware Update Over-the-Air on top of the LoRaWAN® protocol.
Read Flipbook
LATEST VERSION: This document describes potential End-device and network synchronization issues related to the LoRaWAN® 1.0.x Join (Activation) Procedure, and suggests how they can be overcome for a
Read Flipbook
This document describes the architecture and components of a test-bed that enables communication between a LoRaWAN end-device and the DLMS UA Conformance Test Tool.
Read Flipbook
LATEST VERSION: This document describes various aspects related to the implementation and operation of Roaming Hubs, in the form of a LoRa Alliance technical recommendation.
Read Flipbook
LATEST VERSION: This technical recommendation provides a description of the required configuration parameters to be used on the Network Servers and Join Servers to enable Stateless Passive Roaming.
Read Flipbook
LATEST VERSION: This technical recommendation provides the technical requirements between operators to optimize the QoS of Passive Roaming on the LoRaWAN Network.
Read Flipbook
LATEST VERSION: This Technical Recommendation is intended to provide guidance to end-device and LoRaWAN® protocol stack developers to help ensure they produce well-behaved and interoperable products.
Read Flipbook
LATEST VERSION: This document is a Technical Recommendation describing LoRaWAN parameters required by the DLMS User Association for the implementation of interface classes operating over a LoRaWAN...
Read Flipbook
LATEST VERSION: This document recommends a standard QR tagging scheme for LoRaWAN® devices to simplify the device on-boarding steps onto a LoRaWAN® network.
Read Flipbook
LoRaWAN CertifiedCM generally follows international standards for the definition and operation of a certification program. In particular, LoRaWAN Certified is designed as a Type 1b certification...
Read Flipbook
Every LoRaWAN end-device needs to be compliant with the regulatory agency standards as applicable for the region, before it can be sold in region for which it is certified. . The device shall not...
Read Flipbook
This document specifies the minimum testing requirements for an End-Device to be designated “LoRaWAN Certified”. LoRaWAN Certification will confirm that the End-Device meets the Functional...
Read Flipbook