TS010-1.0.0 IPv6 Adaptation Layer
This document describes efficient transportation of IPv6 packets over LoRaWAN® which enables internet-based legacy applications to run natively over LoRaWAN®.
Read Now
Documents & Reports
This Stream includes all of our documents & reports
-
-
TS007-1.0.0 Multi Package Access
This document defines a standard application layer which provides information on the implemented package(s) and the FPort used on the end-device.
Read Now
-
TS006-1.0.0 Firmware Management Protocol
This document proposes a standard application layer firmware management protocol.
Read Now
-
TS005-2.0.0 Remote Multicast Setup
This document defines an application layer messaging package over LoRaWAN®.
Read Now
-
TS004-2.0.0 Fragmented Data Block Transport
This document provides an application layer messaging package over LoRaWAN®.
Read Now
-
TS003-2.0.0 Application Layer Clock Synchronization
This package is useful for end-devices who are unable to access an accurate time source.
Read Now
-
LoRa Alliance® Vendor ID for QR Code
LATEST VERSION: This document provides the Vendor ID to be used with TR005 LoRaWAN Device Identification QR Codes.
Read Now
-
LoRa Alliance Vendor ID for QR Code
This document provides the Vendor ID to be used with TR005 LoRaWAN Device Identification QR Codes.
Read Now
-
2021 End of Year Report
2021: THE YEAR OF MASSIVE SCALING
Read Now
-
TR010 1.0.0 LoRaWAN Roaming Hub
LATEST VERSION: This document describes various aspects related to the implementation and operation of Roaming Hubs, in the form of a LoRa Alliance technical recommendation.
Read Now
-
LoRa Alliance Certification Policies, Processes, and Procedures
LoRaWAN CertifiedCM generally follows international standards for the definition and operation of a certification program. In particular, LoRaWAN Certified is designed as a Type 1b certification...
Read Now
-
TR008-1.0.0 European Roaming Guidelines
LATEST VERSION: This technical recommendation provides the technical requirements between operators to optimize the QoS of Passive Roaming on the LoRaWAN Network.
Read Now
-
TR009-1.0.0 Roaming Configuration Guidelines
LATEST VERSION: This technical recommendation provides a description of the required configuration parameters to be used on the Network Servers and Join Servers to enable Stateless Passive Roaming.
Read Now
-
TR007 Developing LoRaWAN® Devices v1.0.0
LATEST VERSION: This Technical Recommendation is intended to provide guidance to end-device and LoRaWAN® protocol stack developers to help ensure they produce well-behaved and interoperable products.
Read Now
-
2020 End of Year Report
INTRODUCTION | The Power of LoRaWAN®
Read Now
-
TR006 LoRaWAN® DLMS End-Device Monitoring Guidelines
LATEST VERSION: This document is a Technical Recommendation describing LoRaWAN parameters required by the DLMS User Association for the implementation of interface classes operating over a LoRaWAN...
Read Now
-
TR005 LoRaWAN® Device Identification QR Codes
LATEST VERSION: This document recommends a standard QR tagging scheme for LoRaWAN® devices to simplify the device on-boarding steps onto a LoRaWAN® network.
Read Now
-
TS009-LoRaWAN_Certification_Protocol_v1.0.0
This protocol specification allows a Certification test harness to fully validate compliance of 152 the end-device to the LoRaWAN Link Layer Specification [TS001-1.0.4] and the LoRaWAN...
Read Now
-
LW End Device RF Performance All regions V1.0
Every LoRaWAN end-device needs to be compliant with the regulatory agency standards as applicable for the region, before it can be sold in region for which it is certified. . The device shall not...
Read Now
-
LW1.0.4 End Device Certification for All Regions
This document specifies the minimum testing requirements for an End-Device to be designated “LoRaWAN Certified”. LoRaWAN Certification will confirm that the End-Device meets the Functional...
Read Now
-
Loading More...
