TS009-1.2.1 Certification Protocol
This protocol specification allows the LoRaWAN Certification Test Tool (LCTT) to fully validate compliance of an end-device to the LoRaWAN L2 Specification [TS001] and the LoRaWAN Regional Parameters.
Read Now
This protocol specification allows the LoRaWAN Certification Test Tool (LCTT) to fully validate compliance of an end-device to the LoRaWAN L2 Specification [TS001] and the LoRaWAN Regional Parameters.
Read Now
This revision fixes minor issues with MAC commands and brings more clarity to the specification, especially to the description of the back-off mechanism and the notification mechanism.
Read Now
This protocol specification allows the LoRaWAN Certification Test Tool to fully validate compliance of an end-device.
Read Now
This document lists the publications that are issued by the LoRa Alliance Technical Committee. Make sure to read this document to understand the list of all documents including their versions.
Read Now
This document provides recommendations for LoRaWAN devices to minimize collisions even under heavy congestion by enabling Carrier Sense Multiple Access (CSMA) algorithm in conjunction with the LoRaWAN
Read Now
RP002-1.0.4 introduced a contradiction in the use of ChMaskCtrl=5 for the US915 and AU915 regions whereby the use of bit 8 contradicted the definition of blocks of channels.
Read Now
This document describes how an end-device-to-device communication protocol may be designed using the LoRaWAN L2 specification overlaid with application-layer signaling.
Read Now
A summary of what you need to know about IPv6 LoRaWAN adaptation layer frequently asked questions.
Read Flipbook
This document provides information on the Certification protocol.
Read Now
A summary of what you need to know about LoRaWAN® NetID frequently asked questions.
Read Flipbook
A summary of what you need to know about LoRaWAN® Payload Codec API frequently asked questions.
Read Flipbook
A summary of what you need to know about LoRaWAN® Relay frequently asked questions.
Read Flipbook
This errata was created to remove the prohibition of end-devices from sending downlink frames for LoRaWAN Link Layer Specifiation 1.1.
Read Now
This errata was created to remove the prohibition of end-devices from sending downlink frames for LoRaWAN Link Layer Specifiation 1.0.4.
Read Now
A summary of what you need to know about LoRaWAN® FUOTA frequently asked questions.
Read Flipbook
This document describes efficient transportation of IPv6 packets over LoRaWAN® which enables internet-based legacy applications to run natively over LoRaWAN®.
Read Now
This document defines a standard application layer which provides information on the implemented package(s) and the FPort used on the end-device.
Read Now
This document proposes a standard application layer firmware management protocol.
Read Now
This document defines an application layer messaging package over LoRaWAN®.
Read Now
This document provides an application layer messaging package over LoRaWAN®.
Read Now
Loading More...